BECE 2011 Basic Design And Technology (Pre Technical Skills) Past Question Paper One
year
subject
paper
1
Which of the following is a neatening stitch?
- A: overcasting
- B: feather
- C: chain
- D: stem
2
Green leafy vegetables and sea foods provide the body with
- A: minerals
- B: proteins
- C: vitamins
- D: fats
3
Which of the following is a dry method of cooking?
- A: boiling
- B: baking
- C: stewing
- D: steaming
4
The lightness or darkness in a drawing is the
- A: hue
- B: shade
- C: tint
- D: tone
5
Any two primary colours mixed together in equal proportions produce a
- A: complementary colour
- B: neutral colour
- C: secondary colour
- D: tint colour
6
Which of the following lines is used for showing visible outlines?
- A: short dashes
- B: long chain
- C: thick continuous
- D: thin continuous
7
Figure 1 illustrates the principle of
- A: oblique axes
- B: perspective axes
- C: isometric axes
- D: orthographic axes
8
From the following options, select the designing media mixed with water
- A: charcoal
- B: crayon
- C: chalk pastel
- D: poster colour
9
In design analysis, the size of the unit is considered under
- A: cost
- B: ergonomics
- C: safety
- D: function
Figure 2 is a block. Use it answer questions 10 and 11
10
Which of the following represents the front elevation in the direction of arrow X?
- A: A
- B: B
- C: C
- D: D
11
The plan is represented by
- A: A
- B: B
- C: C
- D: D 12. The two methods of drawing orthographic views are
13
A vertical line is associated with
- A: movement
- B: rest
- C: stability
- D: uncertainty
14
Which of the following situations is an indirect risk to a small business?
- A: flood
- B: fire
- C: inflation
- D: theft
15
The factors to consider when setting up a sewing business includes
- A: capital, location and personal needs
- B: capital, location and equipment
- C: raw materials, market and business risks
- D: raw materials, personal needs and demand
16
Which of the following is not a method of temporary termination of a wall?
- A: toothing
- B: racking
- C: Indent
- D: bonding
17
Which of the following is not a mechanical property of metals?
- A: brittleness
- B: ductility
- C: corrosion
- D: malleability
18
The head of a brick hammer is made of
- A: high carbon steel
- B: mild steel
- C: cast iron
- D: medium carbon steel
19
The operation shown in the sketch above is
- A: cross filing
- B: draw filing
- C: smooth filing
- D: rough filing
20
The neutral wire has a colour code
- A: black
- B: red
- C: yellow
- D: grey
21
Electrical appliances are usually plugged to the electricity mains through
- A: switches
- B: lamp holders
- C: socket outlets
- D: ceiling rose
Use figure 3 to answer questions 22 and 23
22
The parts VP1 and VP2 are called
- A: viewing points
- B: vanishing points
- C: viewing planes
- D: vanishing planes
23
The object is drawn in
- A: oblique
- B: isometric
- C: one point perspective
- D: two point perspective
24
Which of the following is not a fastener?
- A: rivets
- B: screws
- C: soldering bits
- D: bolts and nuts
25
The plastic used for making an egg box is
- A: acrylic
- B: polystyrene
- C: nylon
- D: polythene
26
Which of the following instruments are most suitable for dividing a circle into equal parts I. set square II. protractor III. a pair of compasses
- A: I and II only
- B: I and III only
- C: II and III only
- D: I, II and III
27
Polyvinyl acetate is a type of a/an
- A: aggregate
- B: adhesive
- C: abrasive
- D: finish
28
The tool shown above is a
- A: crowbar
- B: pincers
- C: screw driver
- D: claw hammer
29
To avoid vertical straight joint in a wall, introduce a
- A: bat
- B: block
- C: batten
- D: brick
30
The lines drawn below are
- A: tangential
- B: horizontal
- C: vertical
- D: inclined
End Of Paper
End of BECE 2011 Basic Design And Technology (Pre Technical Skills) Past Question Paper One, Thank you for visiting this page, if any spelling mistake or wrong answers are spotted kindly notice us in the comment section below remember to share page to friends and famillies who may need it
Subscribe
Login
0 Comments